Velocity Blunt 35 26″ MTB Wheelset – Disc

Description

The Blunt 35 is designed for the cross country/all mountain rider craving a laterally stiff yet weight conscious wheel. At 35mm wide the Blunt 35 gives you one of the fattest footprints available which will float over the rough stuff and give you more bite and greater tread use through the turns. The inner web of the rim allows for a tubeless application requiring a sealing rim tape and sealant for successful set-up.

PLUS…….FREE Pre-installed VeloPlugs or VeloTape. If you are using tubeless tires, select the valve stem option.

WHY BUY YOUR VELOCITY WHEELS FROM US?
1. We do NOT sell pre-built wheels.
2. We do NOT sell machine built wheels.
3. We do NOT substitute parts from other manufacturers – Velocity Rims/Velocity Hubs.
4. All wheels are built to order by a velocity Master Wheel Builder – then shipped to Us – we in turn then ship the wheels to you.

Yes – the process takes more time – but you get a set of wheels you can trust were built to Velocity’s demanding standards.

COMPETITION BUILD
+ Spokes: DT Swiss Competition (Double Butted)
+ Nipples: Brass
+ Lacing Pattern: 32 spoke 3x
+ Weight (Front/Rear): 890 grams / 1,020 grams

PRO BUILD
+ Spokes: Sapim CX-Ray
+ Nipples: Alloy
+ Lacing Pattern: 32 spoke 3x
+ Weight (Front/Rear): 825 grams / 955 grams

Front Hub:
9mm quick release option – features double disc side bearings for added rigidity under heavy braking.

Convertible option – allows 9mm quick release, 15mm, or 20mm thru-axle compatibility.
All conversion pieces are included with the wheelset.

Rear Hub:
Converts from 135mm quick release to 142x12mm thru-axle compatibility, and will accept Shimano/SRAM 11, Campagnolo 11, or SRAM XX1 cassettes.

One axle and cassette body configuration is included with the wheelset; additional conversion parts are available separately.
Shimano/SRAM 11 cassette body includes a spacer for use with 8/9/10 speed systems.

Velotape Tubeless:
Velocity is proud to announce Velotape, the newest accessory in the Velocity line.
Velotape is specifically designed to convert certain rims and wheelsets tubeless.
The kit includes 10 meters of transparent Velotape, enough to setup two 29ers, and 2 high quality tubeless valves with removable cores.
Installation is easy, requiring only a small punch and sharp scissors.

VeloPlugs – Say goodbye to rim strips
Incredible blowout strength and takes well over 400psi.
Tires start to fail long before the Veloplug.
Tire mounting is easier with the Veloplug.
Rim strips take up a lot of space making tires more difficult to mount.
With the sleek and slippery Veloplug, mounting tires becomes easy.
Spoke replacement is simplified as there is no need to remove a sticky strip.
Just pop out the Veloplug over the offending spoke and pop it back in when repairs are complete.
They can be used over and over.